concrete roads

Tips to protect your concrete roads

Roads are built with two primary raw materials, i.e., concrete and asphalt. Concrete roads are known for their strength and durability and last longer when compared to asphalt roads. But that does not mean that your concrete road cannot be damaged. Eventually, due to extreme weather, continuous movement of vehicles, etc. concrete roads can weaken. Now there are some ways to protect your concrete roads and increase its lifespan by following these tips.

Carry Out Regular Maintenance

If your concrete road is freshly built, you must check it every now and then for cracks. Cracks can take place when the concrete mixture is not right. Also, if the concrete roads are not allowed sufficient time to dry, then cracks are bound to appear on the surfaces. When you come across any of these cracks, make sure that you get them repaired at the earliest. If you don’t do so, there is a possibility that your cracks may widen and lead to accidents.

Seal Your Road

Concrete sealing is one of the ways to prevent your road from damage. When your road or driveway starts showing the signs of a crack, you should consider sealing it. You can either contact one of the concrete driveway repair contractors to get the work done for you or you can visit a local hardware store and get the right type of sealant for your road.

Get Rid of Stains

The frequent movement of vehicles will stain concrete roads due to oil, petrol or diesel leaks. These oil stains should be removed as soon as possible. Also, do not change your vehicle’s oil on the driveway. When you do so, there is a chance of the oil spilling onto the road and so accidents are bound to happen. If you have no option other than changing the oil on the road, use a piece of equipment that will cover the road surface. You can clean the stain marks with cleaning chemicals such as trisodium phosphate or TSP substitutes such as dish wash soap or detergents that are available in the market.

Avoid Water to Accumulate

When water remains on a concrete road for a long time, there is a complete possibility that the road can be damaged. When the ice melts, the water can seep through the minor cracks formed on the road. Again when the temperature decreases, the water can expand and widen the cracks. You can prevent this by constructing your road in such a way that the water does not accumulate on the road surface.

These are some of the tips to protect your concrete roads. If your road is damaged and you wish to conduct repairs, then you can contact a concrete driveway repair contractor to repair your concrete road or driveway.

 

parking lot driveway

How to secure your parking lot driveway?

If you currently have a parking lot driveway or are planning to get one installed for your mall, office, supermarket, hospital or any commercial purpose, you should know about maintaining your parking lot. Driveways with cracks and potholes look untidy and can cause inconvenience for your customers or clients, which can create a negative image for your business as well. To avoid any inconvenience, you need to secure your parking lot driveway by following these tips.

Clean Your Parking lot

Your parking lot can be stained with motor oil, radiator fluid, and similar substances. Motor fluids can penetrate up to a quarter inch in concrete and can also soften an asphalt driveway. Therefore, to prevent damages to your parking lot driveways, clean them by using non-clumping kitty litter to absorb fresh oil, and then using grease-cutting dishwashing detergent and warm water to clean the stains. Scrub the stain repeatedly with grease-cutting, biodegradable cleaners to clean older stains. Use a regular scrub brush for this purpose, a wire brush will only damage the driveway surface.

Fix Cracks in Your Driveway

Water entering through cracks in the surface of the driveway widens the cracks. Therefore, sealcoat the asphalt every few years to prevent water from penetrating your driveway, and cracking it.

Repair Potholes

Patch all the potholes immediately. To remove loose material and debris, use a masonry chisel and then apply a crack filler and patching compound. Seal the entire driveway after the compound dries.

Don’t use Chemical De-icers

Chemical de-icers and cement salts can be used to prevent the collection of snow and ice on your driveway. But these substances penetrate your driveway’s surface leading to cracks. Use alternatives like sand, coffee grounds, and alfalfa meal instead. Use a snowblower or a shovel to remove the snow from your driveway. Spraying the surface of your driveway with sugar beet juice can also help you melt the ice quickly.

Use the Snow Plow carefully

Raise the blade of your snow plow to prevent scraping and damaging the surface of your driveway. If you are using a shovel, use a plastic shovel for uneven surfaces to reduce its risk of catching on the driveway. To effectively eliminate the snow, push snow to the side and shovel it off or remove snow a few inches at a time while working your way downward.

Maintaining and securing your parking lot driveway will not only increase its life but also save you a lot of money for repairs. If you need help in maintaining, repairing, building a driveway or want to gather more knowledge about residential driveway paving, contact a company that provides parking lot maintenance services.

Stamped Concrete

Difference between stamped concrete and stamped concrete overlays

Concrete is the most versatile material used for construction and decorative purposes. Stamped concrete and stamped concrete overlays are two common types of commercial decorative concrete. You can select stamped concrete or stamped concrete overlays depending on your budget, maintenance costs, etc. To find the suitable choice for you, you need to know the differences between the two,

What is Stamped Concrete?

Stamped Concrete

 

Stamped concrete is the process of pouring fresh concrete and stamping or pressing it to create different designs and textures before it dries. This process is carried out with the help of molds that are pressed into the concrete. Color is added with dry shakes or color hardeners and acids are used. Adding colors to stamped concrete can help you install decorative concrete designs that resemble brick, slate, wood, stone or cobblestone.

What is Stamped Concrete Overlays?

 

Stamped concrete overlays are applied over an existing concrete surface. Various blends which contain polymer resins mixed with sand, cement, and other additives, and rubber imprinting tools or acrylic sprays may be used in this process. Stamped concrete overlays are usually recommended if the existing concrete surface is in good condition. The existing concrete surface still has to be prepared before the procedure starts.

Which option is suitable for you?

Stamped concrete overlays are used when there is an existing concrete surface in good condition but needs a new look. Cracks and similar imperfections in the old concrete surface are repaired before applying the overlay. When the surface is prepared and made structurally strong, it can be renewed by applying an overlay and then creating the desired texture and pattern. Colors can be used to complement the color of your house, along with the landscaping themes. With modern technology, you have a wide range of colors and textures that you can choose from. Stamped concrete overlays are an excellent choice for sidewalks and patios as it requires a few laborers and less time.

Sometimes, the concrete surface needs to be changed due to damages that are difficult to be repaired, stamped concrete is a viable option in such situations. If there is some area where you have not laid out a concrete surface, then stamped concrete should be your choice. While there are various advantages and disadvantages of stamped concrete, it is a good choice for driveways due to its solid structure and thickness. Additionally, it does not require a lot of maintenance.

If you are still unsure of your choice or if you are looking to upgrade your patio, driveway, concrete floor or walkway, or any other residential or commercial decorative concrete needs, contact an expert in providing decorative concrete services.

cracks on roads

Causes of cracks on roads

Roads are a primary mode of transport and every day, several vehicles pass through the roads. Therefore, it is important that you have good quality roads for a safe commute. However, due to the constant movement of vehicles, roads do get damaged eventually. Initially, when a road gets damaged, cracks begin to appear on its surface. But what causes roads to cracks? Let’s take a look at some reasons why roads develop cracks.

Water Accumulation

When there is too much water accumulated on the road, the road surface can develop cracks. The accumulated water can seep through the road surface and reach the bottom layer of a road. This water can freeze when the weather is cold and cause cracks to widen.

Oil Spills

There’s always a possibility of oil spills on the road from vehicles as they pass. If the leaked oil and petrol is not cleaned or cleared on time, chemical reactions (between asphalt and the leaked oil or petroleum) can affect the road surface and result in minor cracks.

Drying Shrinkage

Drying shrinkage is a common cause of cracks on concrete roads. Drying shrinkage takes place when the mixture used in the construction of the road is not prepared correctly. The road loses its moisture or dries too quickly. Apart from these reasons, drying shrinkage can also take place due to extreme weather conditions. To avoid drying shrinkage, it is recommended to construct your concrete road from one of the experienced road construction companies.

Stripping

Stripping occurs on asphalt roads when the composite materials are unable to hold together. This type of cracks begin at the base of the road and slowly and steadily move up towards the surface. Stripping takes place due to inadequate drainage measures. Apart from drainage, stripping can take place due to the cyclic pore water pressure that is applied onto the roads because of heavy traffic.

Fatigue or Alligator Cracks

This type of crack occurs when the road is subjected to severe weather conditions over time. Frequent movement of heavy vehicles is also responsible to damage road surfaces eventually. A thick layer of asphalt can help to prolong the life of asphalt roads. Apart from increasing the density of the asphalt layer, road construction companies can also focus on creating a better road drainage system that prevents accumulation of water on roads.

Cracks, when left unrepaired, can develop potholes. Once the potholes are developed, it can lead to huge road expenses in the future. Therefore, it’s better that you take precautionary measures and prevent the formation of cracks on roads. To repair your roads that have developed cracks, get in touch with a road construction company.

road construction

4 types of road construction equipment

Roads are the oldest and most preferred means of transportation. According to research, as of April 2018, ridership in Canada was 158.5 million passenger trips. As road transport is so popular, the roads need to be extremely durable for a safe and continuous commute. A road needs to be strong enough to endure the movement of heavy vehicles. The road construction companies in Edmonton understand this necessity, and so they are careful to construct roads perfectly as required with the help of right construction equipment and professionals. Now when it comes to using the right road construction equipment, the following are the most commonly used.

1. Backhoe

Backhoe

A backhoe or an excavator is used to dig the area and clear the debris to create a construction platform. The backhoe consists of a boom, bucket, and a cabin equipped on crawler units for movement. The boom of a backhoe can be extended or withdrawn depending on the nature of the work to be performed. Apart from digging, an excavator is also used in dredging, grading, landscaping, and demolition of structures

2. Bulldozers

 Bulldozers

A bulldozer has a heavy plate at the front end. With this plate, it can remove large chunks of sand, soil, and other debris and clear the construction area. Also, bulldozers are used to break down or destroy any unwanted structures. Therefore, instead of asking laborers to clear the area or demolish any structures, you can use bulldozers. This will help you to save time.

3. Asphalt mixing machine

Asphalt mixing machine

The asphalt mixing machine mixes the raw materials such as sand, gravel, asphalt cement, etc. to create an asphalt mix which is then laid on the surface of the road. So, if you are constructing asphalt road, then this equipment is a must-have.

4. Compactor

 

The compactor is an essential type of equipment which is used in road construction. This type of heavy equipment is used after the asphalt is poured onto the road. The compactor compacts and pressurizes each and every layer of the asphalt to ensure that the road is flat and strong. There are different types of compactors. The most commonly used types of compactors are plate compactors, jumping jack compactors and the road roller which is commonly used in road construction.

Apart from these 4 types of road construction equipment, forklift trucks, wheel loaders, cranes, etc. may also be used by road construction companies in Edmonton. If you are considering constructing a road in your vicinity, or a driveway for your home, you should get in touch with a road construction company in Edmonton. Apart from constructing the road, a professional road constructor will also carry out regular maintenance and repair works if required. This will ensure that your roads remain in good condition for a long time.

concrete crack

Why does Concrete Crack?

Concrete as a raw material is known for its strength, durability, and endurance. Even though constructing a road with concrete is costly, it is beneficial in the long run as it does not require repeated repairs or maintenance jobs. Concrete is also beneficial as it can withstand extreme weather conditions. Even though concrete is exceptionally durable, and strong, it can suffer damages eventually and so you need to protect your concrete driveway. The damage can be in the form of cracks which can lead to potholes. But why do concrete crack? To answer your question, in this article we have mentioned the reasons why concrete surfaces develop cracks.

Irregular mixing ratio

At times when a concrete company manages to create an odd mixture, the road constructed can eventually develop cracks. If in case, the mixture that was prepared for constructing your driveway consisted of excessive water, or excess dry cement the constructed road would eventually result in shrinkage. This shrinkage eventually leads to cracks.

Ground movement

There are certain instances when your driveway or a road is constructed next to a tree. When your driveway is located near a tree, its roots are bound to expand. This expansion results in pushing the road on the concrete. This movement results in the concrete getting cracked as it cannot bear the force exerted by the roots.

Poor quality of raw materials

You need to be careful when selecting the concrete material for your road construction. If the construction company uses poor quality concrete or low-quality materials, then the concrete roads won’t last long. Also, you need to be careful that the construction company is experienced and has the right heavy equipment to create a smooth concrete surface that lasts long.

Extreme weather conditions

Concrete is known to be tough and long-lasting. But extreme weather conditions can cause damage to concrete surfaces. Frequent rains can cause water logging and so the accumulated water can seep into the road and subsequently cause cracks. Also, if the concrete road or driveway is built in an area where the temperatures are extremely high, the concrete mixture can become loose and cracks begin to appear.

If your driveway, road, or pavement has cracked, you should get in touch with a concrete company to prevent further damage. Proper construction, timely maintenance, and repairs can help you increase the life of your concrete surface.

Stamped Concrete

How to Install Stamped Concrete?

Looking for an affordable and attractive way to update the patio, porch, backyard, or walkways of your house? If you said yes, then stamped concrete can be your best choice. This decorative style of concrete is a preferred choice among countless homeowners in Edmonton. And the best part is that installing stamped concrete apart from normal concrete is that it isn’t a time-consuming process. Therefore, one of the best stamped concrete companies and they will provide accurate and beautiful concrete surfaces.

Let us look at the traditional method of installing stamped concrete to understand how simple the process is.

Protecting Adjacent Elements:

It is essential to protect adjacent buildings, plants, trees, accessories, or other existing slabs before commencing the installation process. These elements should be covered and protected with plastic sheets beforehand.

Subgrade Preparation:

The subgrade makes a big difference in the overall performance and structural integrity of the slab. A well-compacted subgrade prevents drainage and soil erosion under the concrete. The soil should be compacted, and the subgrade should be prepared first.

Form Placement:

Rightly placed forms ensure proper slope or grade for efficient drainage. It is also essential to place forms accurately for neat corners around structures and landscape borders. During this step, forms made from wood, metal or plastic are attached to stakes to contain the concrete in the desired place.

Concrete Placement:

The concrete should be placed as close to its final destination as possible because excessive movement can lead to segregation. The concrete mixture is poured in place. The concrete should be no less than four inches in thickness.

Color Application:

The desired color is added to the concrete using one of the two techniques. The two most common techniques of coloring the concrete are – Integral Coloring and Broadcast Method.

Release Agent Application:

Once the color is settled, a medium-thick layer of a color release agent is applied to the concrete layer. This is done to prevent the texture or pattern stamping mats from sticking to freshly placed concrete. Also, stamping mats don’t work without the use of a release agent. A release agent with a darker tone than the coloring agent provides depth and shadowing in the finished concrete.

Stamping Process:

Patterned or textured stamping mats are then applied to the wet concrete mix. The mats are held in place with some amount of pressure for about 2-3 minutes. As concrete starts to dry soon, stamping is done at a faster pace. Detailing of the patterns are done with the help of hand chisel if necessary.

Drying Process:

Concrete is then left to dry for 24 hours or more. The layer becomes denser and less permeable to moisture, and the overall strength and durability increases.

Cleaning Process:

The stamped concrete is washed with water once the concrete is set. The surface is again left to dry for a day completely.

Sealing Process:

Sealing the stamped concrete enhances the color or stamped concrete, adds luster to the concrete, and blocks penetration of stains from dirt, chemicals, moisture, etc. A clear enhancer or sealant is applied to the concrete with the help of a roller, once it is completely dry.
If you are looking for one of the most efficient and reliable stamped concrete companies, you can reach out to Blacktop Paving. We provide complete paving services with precision for all kinds of residential and commercial surfaces.

Concrete Companies

Things You Didn’t Know About Commercial Concrete Surfaces

Commercial properties are considered to be elegant and well-designed. If you own a commercial property or premise, then you know having a properly built patio from one of the concrete companies can make your property look professional. If you own a commercial space, constructing a concrete surface can be a perfect solution for you. Apart from being long-lasting, there are many benefits of having concrete surfaces. Here are a few things you probably didn’t know about commercial concrete surfaces.

You can Decorate it

There are multiple options for decorative concrete walkways. You have a plethora of design and decoration options to choose from. Some of the options are stamped concrete, concrete dye, concrete overlays, concrete polishing, concrete engraving, etc.

Concrete Mixtures can Also be Designed

You can design your concrete mixtures by choosing suitable ingredients of concrete and identifying the exact volume of materials needed. The ingredients and volume of materials will vary based on the kind of surface you want. When designing the concrete mixture, your engineer will take a thorough look at your requirements and depending on the weather conditions; the concrete mixture will be created with different chemicals.

There are Multiple Color Options

As you already know, the commercial concrete surface can have multiple color options to make it look attractive. When your concrete surface is still in the plastic phase, the color is added to the aggregate. The color options are not only limited to grey and black, but you can apply different shades of every color. When you add colors, it enhances the aesthetics of your commercial concrete surface. So, you do not have to spend on attractive decorative concrete materials to improve the aesthetics of your commercial surface. Colorful concrete surfaces can be a cheaper option instead of decorative concrete to make your commercial concrete look attractive.

Commercial concrete surfaces are quite popular options to choose from. The concrete surface can be both strong and attractive at the same time. If you wish to construct a concrete surface for your commercial space, get in touch with one of the experienced concrete companies in Edmonton. They will ensure that your concrete surface is well-designed and there are no mistakes made during the construction process.

Paving Services in Edmonton

Why Should You Maintain Your Concrete Pavement?

The pavement leading to and surrounding your house is often neglected when you think of home. However, it does make up an integral part of your house. Having a well-maintained pavement is not only aesthetically pleasing but also financially beneficial. Thus, you should watch out for the warning signs when your pavement needs attention, and take timely action to prevent major costs. Maintaining your concrete pavement in an ideal condition will give you the following benefits.

Durability

Performing minor, periodic check-ups and maintenance of your pavement will help in extending its life. Maintaining your concrete pavement by making small fixes whenever any minor cracks or other deformities appear, can help you save on major costs in the long term. For instance, filling up small cracks when they appear will save on costlier expenses when the cracks become wider with time.

Safety

Safety is another important issue that you should consider for having a well-maintained concrete pavement. Although the stretch of your pavement may be short, you may drive your vehicle over it multiple times every day. If you have a deformed pavement, driving over it regularly for a considerable period may cause damage to your vehicle.

If you have kids, any hard surface is potentially risky for them. Concrete pavements that are ill-maintained may gradually develop significant deformities over time and become extremely uneven. This may compromise the safety of the ones walking over them and cause injuries. Such surfaces are especially unsafe for kids, and the risk is greater if your kids ride bicycles or skates. Thus, maintaining your walkways and other concrete pavements are a priority to ensure safety for you and your family.

Aesthetics

Having an aesthetically pleasing exterior for your house includes having a clean, blemish-free pavement. It is one of the first things people visiting your home notice, and it adds to the overall looks of your house. A well-maintained driveway that leads to an elegantly designed home accentuates the exterior and makes it visually appealing.

Maintaining your driveway can not only be rewarding during your stay but may also enhance the curb appeal of your house when you decide to sell it. Instead of spending heavily just before selling, you can make regular minor investments so that when it’s time to sell, your house can have more value and be easily sold than it would have with improper maintenance.

Maintenance of your concrete pavements need not be expensive and tiresome if you get started now with these simple tips to maintain your concrete pavement. Alternately, if you believe your concrete pavement needs renovating, make sure you consult all paving services in Edmonton to find the one that provides maximum durability, safety, economy, and aesthetics.

Concrete Finishing Companies in Edmonton

Benefits Of Seal Coating Concrete

If you have a concrete driveway, or simply a concrete path, then you need to maintain it in order to improve its lifespan. As concrete is sturdy and capable of lasting for several years, experts opt to use this raw material for constructing roads and driveways. Even though concrete lasts long, it is susceptible to several factors that can damage it. Therefore, seal coating is done to protect concrete driveways from extreme weather conditions for a long period. To help you better understand how seal coating works, we have mentioned some of the benefits of seal coating in this article.

Saves Repair Cost

This is considered to be a major benefit of seal coating concrete. When you seal coat a concrete driveway or a patch of concrete, it helps in bringing that patch to its original state and prevents further damage. When this happens, the concrete driveway or pavement would not get damaged repeatedly and would not require frequent repairs. This, in turn, can save a hefty sum on repairs.

Enhances Appearance

When your driveway stays in the same condition for a longer period, it can end up looking rugged. When you opt for seal coating concrete, the sealant can improve the aesthetics of your driveway and make it look attractive. The aesthetics are improved as the sealants have multiple gloss levels and can provide a different finish to the concrete. This makes concrete more vibrant and gives a more appealing finish.

Repels Moisture

Moisture accumulation is one of the primary problems faced by concrete driveways. When a concrete driveway stores moisture for longer periods, it can develop cracks. These cracks can affect the life of a driveway. When you seal coat your concrete driveway, the sealant can repel the moisture, and the water gets evaporated immediately. This saves the driveway from unwanted damages and extensive repairs which affects the quality of the driveway.

Stain Resistance

If you wish to remove the stains that are on your concrete driveway or patio, you can immediately prefer a seal coating. Leaking oil and grease can leave stain marks on your driveway. If these stains are not cleared off your driveway, the chemicals can weaken the driveway and eventually damage it. Seal coating ensures that the stains are no longer visible on the concrete driveway. When the stains are removed from your concrete driveway, not only does it avoid damages but also looks great and increases the aesthetics of your driveway.

Even though concrete lasts long, it should be maintained at regular intervals to ensure that the driveway or patio stay attractive and have a longer lifespan. If you want to have seal coating on your concrete driveway, you can contact concrete finishing companies in Edmonton.