5 Commercial Pavement Sandblasting Mistakes

Paving Services

Sandblasting commercial pavements is one of the much-needed pavement services that every commercial property owner must consider from time to time. If you need to clean your pavement quickly and efficiently, or wish to remove the existing pavement paint, sandblasting is one the best ways. However, many people make numerous sandblasting mistakes which can cost them losses and property damages worth dollars. Listed below are some of the common mistakes.

1) Not Being Prepared

Sandblasting is a vigorous process of cleaning pavements. In order to carry out the procedure, one needs to prepare well before getting started. Several mishaps or inconveniences can take place during the sandblasting process. Not wearing safety gears is a serious mistake several workers and novices do. Covering every part of the body and using right eye gears, gloves, aprons, ear and mouth protection, etc. are necessary precautions you must take to remain safe.

2) Not Considering the Aftereffects

Apart from the concerns, one must also be prepared for other problems caused during and after the sandblasting is done. The first thing one needs to do is be prepared for the loud noise. A lot of high-frequency noise is created when the process takes place. It’s best to carry out the process when the commercial lot is unoccupied, or people must wear appropriate gears to cover their ears. Another thing that people on the commercial lot need to be prepared for is dealing with the mess created post the sandblasting process. So before you start, make sure you have enough brooms and other dust-removal materials.

3) Using Wrong Type of Particles

Varied blasting materials are available in the market, and selection of the wrong materials can only ruin your commercial pavement further. For asphalt and concrete pavements, traditional, fine sand is perfect. But make sure there aren’t any small rocks or other debris that can damage your pavement. If you have a pool of calcium deposits, fungus and mold on the pavement or in the crevices, glass bead blasting can be the ideal option for you. Organic blasting materials, such as finely crushed shells or baking soda, are also considered to be some of the best options for cleaning softer surfaces.

4) Using a Small Blaster

When managed on your own or asking the caretaker of your property to sandblast, you won’t have a huge range of products available for commercial sandblasting. And most of the options available are very small. While using a small unit may seem like a good idea, it’s actually better to choose a mid-range blaster. Smaller blasters often require starting and stopping much more frequently. They need to cycle more often than larger blasters, taking up more time. This can be a major concern when you have a large commercial pavement to sandblast.

5) Trying DIY

Sandblasting is a big project, and is best done by professionals. The process can be very dangerous and has the potential to damage your commercial pavement and property. Unless you don’t have in-depth knowledge and hands-on experience, avoid taking up the task of sandblasting in your own hands. Don’t let your gardeners or caretakers of your commercial property do the same if they also lack the expertise. It’s better to hire sandblasting professionals who have complete knowledge about the process and have the specific tools and equipment to carry out the procedure.

Another mistake that most people do is hire an inexperienced worker for their commercial pavement sandblasting project. Hiring a worker without an appropriate level of experience is almost as bad as DIY sandblasting. They may fail to tackle the serious situations and end up making them worse. Therefore, look for proficient sandblasters in your area who provide quality and complete commercial pavement services.

Leave a Reply

Your email address will not be published. Required fields are marked *