Road Construction Companies in Edmonton

Signs a Road Needs Removal and Replacement

Well maintained roads not only provide a smooth ride but also ensures that there are minimum accidents. When a road is not repaired or not in a proper state, it leads to unwanted accidents and severe damages to vehicles. In order to ensure that such incidents don’t occur, you need to check the condition of roads often. When you identify that your road is not in good condition, you can carry out repair works immediately to prevent it from deteriorating further. Apart from preventing accidents, it will reduce your repair expenses as well. To help you know if your road needs any rework, we’ve listed down a few signs that indicate your road needs repairs.

Potholes

When your road develops potholes, you have to make sure that it is filled to prevent any accidents. If repairs are not conducted on time, the smooth flow of traffic is affected as well. In fact, unrepaired potholes can increase and thus, make it difficult for the traffic to move. Therefore, the moment there are several potholes, the road should either be repaired or removed and replaced completely.

Flooding

If your road is not well designed, water can accumulate over it during monsoon for a longer time. The accumulated water can damage your asphalt road significantly. This is because the water loosens the mixture used for holding the road together. This loosening causes cracks to develop which eventually results in potholes. So, then if flooding roads or water accumulation is frequent, then your road needs to removed and designed properly. The new road design should be such that the water does not remain accumulated on the road and drains away quickly.

Cracks

If a road develops too many cracks, it requires immediate repairs or replacement. There are several reasons that a road develops cracks. Some of the reasons include heavy vehicles passing through resulting in widening of the road and eventually cracking, leaking oils that weaken the mixture of the road, improper mixing during the construction of roads, etc. You can repair the cracks by seal coating the road, filling up cracks with chemical mixtures, or removing that part of the road altogether and replacing it with a better patch.

Accidents

If a road experiences too many or frequent accidents, it might require replacement. Some of the reasons for accidents include steep turning curves and poor road designs. To avoid such accidents, you may have to replace a patch of road to ensure that there are minimal accidents. When you decide on replacing roads, the engineers and road construction companies may change the angle and elevation of the road and create a better road design that minimizes accidents.

Road safety is of utmost importance, and you should ensure that you pay attention to these road signs and make adjustments to the road to prevent any problem. If you need assistance in removing or replacing an existing road, then get in touch with one of the road construction companies in Edmonton.

Paving Services

5 Commercial Pavement Sandblasting Mistakes

Sandblasting commercial pavements is one of the much-needed pavement services that every commercial property owner must consider from time to time. If you need to clean your pavement quickly and efficiently, or wish to remove the existing pavement paint, sandblasting is one the best ways. However, many people make numerous sandblasting mistakes which can cost them losses and property damages worth dollars. Listed below are some of the common mistakes.

1) Not Being Prepared

Sandblasting is a vigorous process of cleaning pavements. In order to carry out the procedure, one needs to prepare well before getting started. Several mishaps or inconveniences can take place during the sandblasting process. Not wearing safety gears is a serious mistake several workers and novices do. Covering every part of the body and using right eye gears, gloves, aprons, ear and mouth protection, etc. are necessary precautions you must take to remain safe.

2) Not Considering the Aftereffects

Apart from the concerns, one must also be prepared for other problems caused during and after the sandblasting is done. The first thing one needs to do is be prepared for the loud noise. A lot of high-frequency noise is created when the process takes place. It’s best to carry out the process when the commercial lot is unoccupied, or people must wear appropriate gears to cover their ears. Another thing that people on the commercial lot need to be prepared for is dealing with the mess created post the sandblasting process. So before you start, make sure you have enough brooms and other dust-removal materials.

3) Using Wrong Type of Particles

Varied blasting materials are available in the market, and selection of the wrong materials can only ruin your commercial pavement further. For asphalt and concrete pavements, traditional, fine sand is perfect. But make sure there aren’t any small rocks or other debris that can damage your pavement. If you have a pool of calcium deposits, fungus and mold on the pavement or in the crevices, glass bead blasting can be the ideal option for you. Organic blasting materials, such as finely crushed shells or baking soda, are also considered to be some of the best options for cleaning softer surfaces.

4) Using a Small Blaster

When managed on your own or asking the caretaker of your property to sandblast, you won’t have a huge range of products available for commercial sandblasting. And most of the options available are very small. While using a small unit may seem like a good idea, it’s actually better to choose a mid-range blaster. Smaller blasters often require starting and stopping much more frequently. They need to cycle more often than larger blasters, taking up more time. This can be a major concern when you have a large commercial pavement to sandblast.

5) Trying DIY

Sandblasting is a big project, and is best done by professionals. The process can be very dangerous and has the potential to damage your commercial pavement and property. Unless you don’t have in-depth knowledge and hands-on experience, avoid taking up the task of sandblasting in your own hands. Don’t let your gardeners or caretakers of your commercial property do the same if they also lack the expertise. It’s better to hire sandblasting professionals who have complete knowledge about the process and have the specific tools and equipment to carry out the procedure.

Another mistake that most people do is hire an inexperienced worker for their commercial pavement sandblasting project. Hiring a worker without an appropriate level of experience is almost as bad as DIY sandblasting. They may fail to tackle the serious situations and end up making them worse. Therefore, look for proficient sandblasters in your area who provide quality and complete commercial pavement services.

Asphalt Companies in Edmonton

5 Errors You Should Avoid In Asphalt Paving

There are several reasons why we love asphalt paving. One of them is its cost-effectiveness. However, in order to ensure your investment in asphalt paving is cost-effective, you need to be careful when constructing it. When paving an asphalt driveway, be it for a commercial or residential purpose, there are several mistakes that can affect the lifespan of the paving. As a result, you will have to carry out multiple repairs which will only increase your expense of maintaining it. Therefore, before you start with your asphalt paving, here are 5 errors you should be aware of.

Wrong Choice of Raw Material

You need to choose the right raw material when you opt for constructing your asphalt paving. When choosing the raw material, you need to consider the weather conditions, the number of vehicles that will pass through, and other external elements. If you don’t select the right raw material, you might end up with weak paving that may require repeated repairs. It is also important that you don’t compromise on the quality of your paving by selecting low priced materials. Make sure you choose the right asphalt mix for constructing your asphalt paving. High-quality asphalt is the best and allows the driveway to stay in good condition for a longer period.

Lack of Skilled Labor

Apart from raw materials, you also need to have the right laborers for construction purpose. When you have inexperienced laborers, they tend to make some mistakes. These mistakes can result in a weak driveway that may require repeated repairs. An experienced professional follows the proper steps involved in the process of construction and helps in developing a good asphalt driveway that lasts long. Therefore, make certain you have skilled and experienced laborers to do the work for you.

Irregular Construction Speed

When paving asphalt, do not try to complete the construction process in quick time. If you try to finish the construction process in less time, then you are bound to make some mistakes. As a result, your paving may not be constructed properly, and it may get damaged within a short period. Therefore, make sure you take sufficient time to plan and execute the entire project. Understand the structure of your landscape and accordingly come up with a proper plan regarding the type of materials needed and the necessary adjustments that need to be done before you begin the construction process.

Improper Planning

As mentioned in the previous point, you need to plan properly. In the planning phase, you need to pay attention to minute details such as removing any plants or vegetations, rocks, etc. that are on your desired path. If you fail to have a proper plan, it may lead to unwanted hurdles during the construction process.

You will have to consider several other things when constructing an asphalt paving such as how you want to design your driveway, the elevation of your driveway, etc. If you want to have a smooth construction process of your asphalt paving, you can contact one of the asphalt companies in Edmonton to assist in constructing your driveway. A professional company will see to it that your asphalt paving is constructed well and lasts for a good number of years.

Asphalt Services in Edmonton

How To Repair Asphalt Cracks And Potholes

Usually, asphalt driveways can last for more than two decades if they are maintained properly. Over time, an asphalt driveway can develop problems such as cracks, potholes, broken patches, etc. and this is when you need to minimize the damages by carrying out repair works. You should check for signs that indicate if your asphalt needs repairs or reconstruction. There are several reasons for a damaged asphalt driveway such as extreme weather conditions or wear and tear due to the frequent use of the driveway. So, if your asphalt driveway has suffered damages over time, then here is how you can fix your asphalt driveway.

Repairing Asphalt Cracks

Before initiating the repairs, you should always check for weather conditions. Note that a sunny day is the best for repairing a driveway. Here is how you can repair cracks in an asphalt driveway:

  1. Buy a melt-in filler from a local asphalt services company.

  2. Clean the driveway properly before you begin the repairing process.

  3. After cleaning the driveway, prepare the mixture according to the instructions on the cover.

  4. After preparing the mixture, insert the mixture deep into the cracks.

  5. Post-filling the cracks, you would require a small flamethrower to melt the mixture added in the cracks.

  6. Direct the flamethrower in such a way that it is concentrated only on the material.

  7. Once you complete the process of melting the material, allow it to dry for half an hour.

  8. After the crack material dries, you have to apply a bead trowel patch to strengthen the patch.

  9. Allow it to dry overnight.

  10. The driveway is now ready to use.

Repairing Asphalt Potholes

Potholes are inevitable when the driveway is exposed to extreme weather conditions. Repairing asphalt potholes is quick and easy. Here is how you can fix asphalt potholes:

  1. You need to have an asphalt emulsion repair compound.

  2. Similar to the filling the cracks process, before repairing the driveway, ensure that it is properly cleaned and free of debris and dirt.

  3. After cleaning the driveway, open the packet which has the compound mixture.

  4. Pour the mixture onto the cracked asphalt area and compact it in such a way that it becomes uniform and flat.

  5. You can compact the mixture with a tamping tool or a shovel.

  6. Allow the compact to dry for a few hours.

Maintaining an asphalt driveway is vital as it improves the aesthetics of your driveway and helps it to last long. If you don’t prefer repairing your driveway by yourself, you can contact a construction company that specializes in providing asphalt driveway repair services in Edmonton.

Pavement Companies in Edmonton

Is Your Asphalt Pavement Ready For Spring?

It’s that time of the year when the weather changes and spring arrives. This change in weather means it’s time to look around you for what needs to be repaired and prepared for the season of spring. One such thing to pay attention to is your asphalt pavement. According to pavement companies in Edmonton, changing weather and temperatures can affect your asphalt pavement. So is your asphalt pavement ready for this spring? If not, then here are some tips to help you make it ready.

Inspect the Pavement

The onset of spring will melt the ice and leave your pavement clear. The very first thing to do is to scan your pavement thoroughly. Look for the visible signs of damage. Also, check for the strength of your pavement. Look for the potholes if any. Make a note of each and every damage that you see.

Repair the Damage

Once you are aware of the damages on your pavement, it’s time to repair those damages. First, prioritize the task of sealing the cracks that have formed on your asphalt pavement. If you do not seal the cracks, they will let water seep into the base of your pavement and make it weak. Potholes have the potential to cause accidents on your pavement. To avoid accidents, you need to fill up the potholes.

Consider Sealcoating

Sealcoating is a thin liquid that is evenly applied on an asphalt pavement. Sealcoating prevents your pavement from getting damaged due to harsh sunlight, water, ice, oil, salt and any other chemical substance. For this reason, you should get your asphalt pavement seal coated once in every three years to elongate its life.

Repaint the Faded Paint

Irrespective of the quality of paint you use, it will fade over time. And when the paint is used for outdoor purposes like pavements, the chances of it fading is even higher. For an asphalt pavement, you might have old faded parking lines and stripes painted. Repaint them and make your pavement looks new again. It will not only enhance the aesthetic appeal of your pavement but also ensure you are complying as per the local zoning regulations.

With these small changes, you can make your asphalt pavement new and ready for spring. Apart from being ready for spring, this restoration will also enhance the existing strength of your asphalt pavement. So go ahead and make your pavement ready for the spring and if you need help with the seal coating and repairs, reach out to one of the finest pavement companies in Edmonton.

Paving Experts

Tips To Maintain Your Newly Paved Office Driveway

Your commercial driveway is the path that makes the drive to your office or its parking lot safe and easy. It is also one of the very first things people notice about your commercial space. Hence, it is crucial to maintain your office driveway properly.

Even if your driveway is newly paved, it may still break down due to improper use. This is because similar to any other aspect of your commercial property, your driveway also requires regular upkeep to ensure that it is safe and free of any cracks or potholes. The better the care and maintenance you give your driveway, the longer it lasts. It is highly recommended to conduct a routine check for your pavement at the end of each season.

Here are a few new driveway care and maintenance tips to keep your office pavement flawless:

1) Prevent Oil and Gasoline Spills

Although an oil or gasoline spill is never a good event for your pavement, it is especially harmful for an asphalt driveway. This is because asphalt is an oil-based material and a gasoline or oil spill may dissolve the surface of your driveway and lead to its discoloration and fading. Hence, it is important to avoid any such spills on your commercial driveway. If by any chance the accident does happen, immediately call a professional contractor to get it cleaned and repaired efficiently.

2) Fill in the Cracks

Cracks may develop on your driveway due to the movement of its base or its subsoil level during the freezing months. These movements usually result from the seepage of water under the driveway due to snow formation. Once the water seeps in your pavement, it remains stagnant there for a longer period of time giving rise to cracks. If you notice the appearance of cracks or holes in your pavement, call a professional to inspect your driveway and measure the depth of these cracks to fill them appropriately.

3) Remove the Snow

Snow removal should be prompt, thorough and timely. Failure to do this can lead to serious damages like cracks and potholes on your driveway. This is because, if the snow is not cleaned on time, it melts and the cold water then percolated into the base of your driveway, giving rise to cracks. Get the snow shoveled by a professional regularly during the winter months to avoid the formation of cracks and potholes in your driveway.

4) Seal it Timely

Using a quality seal coat will not only increase the life of your driveway but also enhance its appearance. The seal also makes sure that your driveway is locked with the materials properly keeping the dust particles and cracks at bay. It is recommended to seal coat your pavement every 3 years to keep your newly paved driveway well maintained.

Keep these new driveway care and maintenance tips in mind to make sure the drive to your office is easy and comfortable. If you notice any discoloration or cracks, consult our paving experts to repair and maintain your commercial property today.

Paving Experts

Recycled Asphalt: Is It A Good Option For Your Office?

It’s amazing how different types of materials can be given a new life by simply recycling. In addition to recycling paper, plastic and glass, it is even possible to reuse asphalt. Recycled asphalt is also termed as old asphalt and is made up of old paving materials that would otherwise end up in a landfill.

To make recycled asphalt, used asphalt is ground into a new aggregate suitable to be used for commercial pavements or other construction projects. Installing recycled asphalt for your commercial pavement can be a good option for many business owners. This is because recycled asphalt is cost-effective as well as durable. Here’s a closer look at the pros and cons of recycled asphalt to help you make an informed decision for your commercial driveway:

Pros of Recycled Asphalt:

Here are some reasons why recycled asphalt might be a good idea for your project:

  • Affordable

One of the major advantages of recycled asphalt is that it is cost-effective. This is because paving recycled asphalt requires fewer resources than fresh asphalt. Additionally, its production requires less labor and equipment which in turn reduces your expenses. Contact our experienced contractors to learn more about the pavement of recycled asphalt or you can request a quote on our website to estimate your budget better.

  • Eco-friendly

Asphalt is a non-bio degradable material and when thrown in a landfill, it tends to stay there forever. Recycled asphalt is an eco-friendly solution to manage this waste that benefits your budget as well as the environment.

  • Durable

The major component used in recycled asphalt is tar. And, tar is known for its durability and high adhesive strength. Hence, if paved correctly recycled asphalt can last a reasonable period of time.

Cons of Recycled Asphalt:

Recycled asphalt though affordable has cons of its own too. Here are a few disadvantages of recycled asphalt:

  • Quality

When the asphalt is reused, it usually compromises the quality of the original material. Hence, it is not as durable as fresh asphalt and develops cracks and potholes more frequently.

  • Discoloration

Due to the previous exposure to sun and other weathering conditions, the recycled asphalt loses its luster earlier than normal asphalt. And, the usual deep, black color of traditional asphalt fades away more easily. Hence, it is not suitable for office spaces that experience heavy traffic.

  • Maintenance

It is important to get a driveway paved with recycled asphalt maintained by a professional contractor only. This is because trying to seal or repair the used asphalt can lead to permanent damages on its surface. Cleaning with the harsh chemicals can also reduce its lifespan. Regular maintenance with an experienced contractor ensures your driveway lasts a longer.

Consider these pros and cons of recycled driveway to make the right choice for your business. You can also contact our experts at Blacktop Paving to help you with the selection and the pavement process.

Asphalt Paving Company

How can Blacktop Paving help your Business Save Money?

Business owners are always on a lookout for economical solutions that help maximize profits. This strategy is not limited to business operations but also extends to the maintenance of their commercial property. Your commercial estate is the first thing that a potential client encounters. The state of your estate can make or break your impression. A driveway filled with potholes does not offer ease of access to clients, which in turn may affect your operations. Additionally, the continuous repairs can take a toll on your finances. Hence, apart from choosing the right material, selecting the right paving company is also vital. While asphalt is durable, improper installation can take away the advantage. Working with an experienced asphalt paving company like Blacktop Paving can prevent these issues and also save you money.

Improved Drainage

Poor drainage is the major culprit behind broken down roads. Without proper drainage, the standing puddles of water will eventually weaken and break down your asphalt pavement. This leads to cracks and potholes that further deteriorate your driveway and parking lot. This results in frequent repairs which can be both expensive and frustrating. Proper drainage is an important consideration while installing asphalt. Depending on your asphalt surface, we would give it the adequate amount of slope and leveling required for good drainage. This helps in preventing unnecessary repairs and enhances the longevity of your asphalt driveway.

Proper Installation

Improper installation reduces the lifespan of your asphalt pavement. While drainage is a part of the installation, there are various other factors that need consideration. If the foundation or base of your asphalt surface is weak, then the surface won’t last long. At Blacktop Paving, we thoroughly inspect the area to resolve any weak spots before initiating the installation process. A strong, debris-free base with accurate compaction and grading will increase the lifespan of your asphalt, saving you money in the long run.

Benefits of Experience and Reputation

The type of contractor you choose to partner with not only affects the installation but also the quality of the surface. When looking for paving firms, you may find many contractors claiming the best service at a cheap rate. While the low cost may tempt you, there may not be any guarantee of the quality of products being used. It is best to go with a reputed and experienced firm. An experienced asphalt paving company like us will not skimp on quality. We use quality materials, the right equipment, and the installation is done by skilled professionals to ensure you gain the maximum benefit from your asphalt pavement.

Asphalt Maintenance

Be it concrete or asphalt, your driveway and parking lot need maintenance to make sure the surface lasts long. Weather, dust, debris, water, chemicals, etc can have a toll on your asphalt surface. In order to prevent early degradation, regular maintenance is vital. Crack filling at times and sealcoating every few years will prevent early deterioration of your asphalt pavement. Blacktop Paving offers these services that enhance the life of your asphalt surface.

Choosing the right asphalt paving company is crucial to prevent costly repairs and gain maximum benefit from the paved surface. All these services offered by Blacktop Paving will ensure a lasting asphalt driveway and parking lot. Additionally, the installation process is planned in a way to cause minimal interference in your business operations. Whether your commercial driveway or parking lot need repairs or full installation, connect with us and you will not regret your investment.

Edmonton_asphalt_paving_company

5 Elements of High-quality Parking Lots

When you maintain a commercial real estate property, chances are that you have a large parking lot. A parking lot must be maintained for two reasons:

  1. It creates an impression on the employees and customers that visit the business

  2. A well-maintained parking lot simply lasts longer

So, how do you know if your parking lot is well-maintained? You look out for these signs.

1) Smooth Integration of your Parking Lots

Have you had a part of the parking lot repatched? Or perhaps, you have extended your parking lot? Two parking lots should not look or seem or feel different. There should be no visible difference of color, and the texture or the finish should not feel different.

If you do find that there is a poor integration of your parking lots, the asphalt company has not done a good enough job.

2) Good Gravel Foundation

Beneath the tar is the gravel foundation. Your parking lot is only as good as the gravel base. Without a good gravel base, the asphalt layer on the parking lot will break under the weight of the constant traffic. A poor gravel base will result in the asphalt crumbling. A good gravel base consists of sand and small stone gravel.

3) Effective Drainage

Water, whether it be from snow or rain, needs to go somewhere. If it collects and forms puddles on your parking lot, the water will seep into the asphalt, weakening the bonding. Eventually, the asphalt would crumble, causing potholes.

Your parking lot should have:

  • Drains and Inlets: Drains and inlets should be strategically placed to receive water.

  • Asphalt Curbing: Curbing helps direct the water to a drain

  • Parking Lot Slope: Your parking lot will slope in certain areas to drain off water

4) Snow Removal

Edmonton sees heavy snowfalls that can overfill your parking lot. Snow should not just remain on your parking lot. It needs to be removed regularly.

5) Attention to Detail

The end product of your parking lot must be even surfaced and have crisp and sharp edges. Attention to detail simply means that your parking lot is well-maintained and looks good.

You will find that Blacktop Paving has excellent services. We are a local Edmonton asphalt paving company and provide services ranging from asphalt paving to repair to snow removal.

Asphalt Driveway Paving

Which Asphalt Repairs Should you Choose

Time, weather and traffic will eventually erode your asphalt pavement. Over time, expect your asphalt driveway to develop cracks, to crumble apart and have potholes. When you hire an asphalt contractor in Edmonton, you have several asphalt repair options to pick from. Which are they?

Crack Repair

Cracks in your asphalt driveway occur because asphalt expands in the heat. If asphalt cracks are not dealt with, they will spread across your driveway.

To fill an asphalt crack, first dirt has to be removed from it. At Blacktop Paving, we do this by either a wire or a brush. Then, using a hose or high pressured water, we flush out any remaining dirt from the crack. Once that is done, we prepare a tubed asphalt patch and carefully pour it into the crack. With the mixture set in, we smoothen it and bring the patch to the same level as the asphalt driveway.

Pothole Filling

A pothole may happen due to moisture collecting on the surface, along with the constant pressure of vehicles. Moisture may come from either the ground or collect on the surface due to rain.

The first step for pothole repair that Blacktop Paving undertakes is to clean the area. A pothole contains dust, dirt, small stones and loose asphalt debris. We use a  brush and high pressure water to clean the pothole area. After that, we prepare an asphalt patch and pour the material into the hole. A 2 inch base is set so that the asphalt patch sets in properly. The patch is smoothened out and brought to the same level as the asphalt driveway.

Asphalt Overlay

Asphalt overlays are perfect for large asphalt areas such as a municipal or commercial parking lot. An asphalt overlay essentially strips away the top layer of the asphalt and replaces it with a fresh asphalt layer.

An asphalt overlay is usually used to extend the life of a 5 to 10 year old parking lot. It’s an affordable option in comparison to repaving.

Asphalt Repaving

When the asphalt driveway is crumbling and no amount of repair would extend its life, you choose asphalt repaving. For asphalt repaving, we remove all layers of the asphalt and rebuild it from scratch.

The professional asphalt contractor will recommend the best option for you. Asphalt repair should not be delayed as it will lead to further degradation of your pavement or driveway.

You can reach out to Blacktop Paving if you wish to hire a professional asphalt contractor. You will discover that we come with experience and have a long list of recommendations.