How Do You Prevent Asphalt Damage?

Asphalt Driveway Repair

Asphalt is one of the toughest materials to use in construction of your driveway. But even the toughest can be broken when subjected to natural forces. If you have observed rocks on the riverside, you will see that they have been withered away due to the water splashing across them constantly.

How do you prevent asphalt from cracking? Here are a few ideas to help you prevent your asphalt from getting damaged.

Prevent Water Damage

To prevent your asphalt from cracking, the best thing to do is to prevent water intrusion through or under the pavement as much as possible. Water is susceptible to freezing and thawing, which prematurely damages the pavement. Try to get good drainage away from the driveway as well. Your paving contractor can help with this as they are going through the paving process. Do not let water collect on your driveway.

Clear the Way

As mentioned above, to keep your pavement intact, it is important to move rain or flood water off the surface and into the drains as fast as possible. To accomplish this, remove debris from pavement and clear out blocked drains. It is also crucial to check and correct pavement slopes and flow lines to ensure asphalt driveway safety.

Level the Field

No, not the playing field but your driveway. You want your pavement and the people who walk on it to be safe. Your parking lot should be free of dips, depressions, and potholes that not only allow further water damage, but could also cause someone to trip and fall. Different types of solutions are available. It will depend on the root cause of the damage and also the type of environment you reside in. You will need the help of a professional contractor in this case.

Fixes? Maybe

If there are cracks in the pavement, seal them as needed. Sealcoating periodically will help keep the elements from oxidizing the surface. However, do not over-seal, as that will reduce the life of the pavement. Sealcoat only when the previous sealcoat is worn off by traffic to a point where significant portions of the bare pavement below the sealcoat are showing.

If There is a Lot of Damage

If your pavement still looks worn out, it may be time to think about replacing the asphalt. A lot of times, there are problems with the structure or there are problems with the foundation. Depending on the cause, you may have to replace the asphalt if it stops functioning mechanically, meaning it does not drain properly, is bumpy, or there is too much settling.

Contact a professional who will be able to repair your driveway if you have potholes or cracks developing. Avoid DIYing your asphalt driveway repair because it will be troublesome and apart from that, you may commit some mistake which might cost you your time and money.

Leave a Reply

Your email address will not be published. Required fields are marked *