Asphalt Driveway Paving

5 Signs your Driveway needs Repaving

Confused about your driveway maintenance?

Well, here’s a list of 5 easy signs your driveway needs repaving.

Although driveways are the most neglected part of a property, it is essential to conduct a regular maintenance as it is the entrance to your home. Just as the interior of your house is well decorated to attract attention, the exterior too deserves the same. A well-furnished driveway not only creates a good first impression, but also adds value to the house.

Here are 5 easy signs your driveway needs repaving:

  1. Weather Conditions

Homes located in extreme climatic conditions should be cautious about indentations and marks to their driveway as they are caused due to the heating of asphalt which makes it soft.

  1. Multiple Potholes

A common sign of aging asphalt are potholes, caused by the wear and tear from traffic. This is caused due to the expansion and contractions of the ground beneath the asphalt which weakens and cracks due to the vehicles. The appearance of one pothole may  indicate a weak spot in the paving, but if you spot multiple potholes at a time, it suggests the surface is no longer capable of supporting vehicle traffic and needs to be repaved immediately.

  1. Water Pooling

Asphalt is a porous material and when installed accurately, it should be able to filter the water down into the ground surface. However, if you’ve noticed water pooling or streams of water just rolling off your driveway, then it’s a clear indication that the surface is failing. Drainage issues can quickly escalate and cause extensive damage to your property, which can be immediately avoided.

  1. Unevenness

Once your driveway begins to look uneven in places with bumps here and there, it is a clear sign that the surface beneath your paving is unstable and has caused structural damage which needs to be replaced.

  1. The Life Span

Asphalt driveways have a life span of 12 to 35 years, provided it’s well maintained. It has the least initial investment as well as the highest level of maintenance. After the initial installation takes place, seal coating of the asphalt in every 3 years ought to be done or else it’ll crack.

So, to those of you who are keen on maintaining your driveway, fear no more, we are at your door. Blacktop Paving can provide services in repaving and maintaining a driveway.

Edmonton Driveway Paving

Best Type of Gravel for your Driveway

Being a vital part of your home’s exterior, a well-constructed driveway can enhance the aesthetics of your property. Different types of materials like asphalt, concrete, pavers, and gravel are used for constructing a driveway. As one of the most affordable options, gravel driveways can add a charm to your home’s aesthetics. There are different types of gravels available to choose from. The choice of gravel can affect the installation and longevity of your driveway. Hence, choosing the right type of gravel is vital for a strong and durable surface. Being aware of the different types of gravel in relation to the installation process can help you select the best type of gravel for your driveway.

Which Type of Gravel Should be Chosen?

Gravel driveways are composed of different layers. Each layer comprises of different sized gravels and serves its own purpose. You need to make sure each layer has the appropriate type of gravel for good installation and durability.

  • The first layer or foundation, which is a 4-inch layer, must consist of baseball sized rocks. These rocks form a strong foundation as they provide good drainage and prevent smaller rocks from disappearing into the soil.

  • Over the base, you must place another 3-4-inch layer of golf ball sized rocks. These smaller gravels serve similar functions as the ones in the base. They also fit well against the larger gravels in the foundation, forming a strong base for a driveway.

  • The top layer must consist of another 4-inch layer of marble-sized rocks that may vary in color depending on the type of stone.

It is best to use machine crushed stone rather than round rock for each layer of your gravel driveway. The machine crushed stone, usually has an angular shape that locks together to form a strong surface. Round rocks usually slip, creating an unstable surface. For the top layer, you can find a variety of gravels to choose from that can enhance the aesthetics of your property. Some of the different types include:

Crushed Stone

This is a type of material that closely represents a typical gravel driveway. Crushed stones are sized to ideally suit the construction and surfacing of your residential driveway. They can be comprised of limestone, granite, or trap rock depending on the quarry. The blend of gray and white shades makes these stones perfect for any landscape.

Pea Gravel

One of the most popular types, pea gravel is used for a number of residential driveways. These gravels feature a variety of colors like tan, brown, white, gray, green, blue, and red, and are typically small, smooth, and round in appearance. Their aesthetically pleasing qualities, in terms of texture and colors, make them one of the most popular choices.

White Marble Chips

Unlike their name, marble chips are not necessarily white but can add a touch of elegance to your property. This type, consist of streaks of gray combined with white to add to their visual appeal. Their shimmery and sparkling appearance reflect sunlight and prevent the property from being overheated.

While choosing the right type of gravel for your driveway is important, proper installation is equally vital. Hence, it is best to consult a professional paving company to guide you on the best type of gravel for a lasting and aesthetically pleasing driveway.

Concrete Companies Edmonton Alberta

How to Maintain your Concrete Driveway

Concrete driveways are common features in many homes. Concrete is often favored because of the several benefits it offers. They not only enhance your home’s curb appeal but are also a cost-effective, low maintenance, and durable option. However, once you have a concrete driveway installed, it is up to you to ensure it lasts long. Over the years, the weather, sunlight, and traffic can take a toll on your concrete driveway. Hence in order to retain its appeal and longevity, you need to maintain your concrete driveway. Implementing these tips will ensure your concrete driveway retains its aesthetics and durability for years.

Keep it Clean

One of the easiest ways to keep your concrete strong and attractive is to clean it regularly. Use a simple power washer to remove any dirt and debris buildup. Any stains from grease, oil or gas must be cleaned immediately. While sealants do protect your concrete driveway from staining, it only does so if they are removed immediately. If not cleaned, the stains can cause discoloration and unattractive patches. Hence, to retain your driveway’s appealing aesthetics, you must clean it regularly.

Reseal your Driveway as Required

When your concrete driveway is installed, a sealant is applied after the concrete is set in order to protect it. Concrete sealers help preserve the surface of your driveway by preventing water from getting into the surface and damaging it. However, even the best sealant will gradually wear down due to traffic and time. Hence, you will need to reseal your driveway surface to maintain its durability. Typically, you must reseal your driveway every three to five years, but it also depends on the usage.

Repair Small Cracks

Small cracks can occur due to certain naturally occurring forces as well as traffic and weather abuse. If left unrepaired, these cracks can eventually widen and weaken your concrete surface. This may lead to costly repairs and replacement. In order to avoid this, it is best to use concrete patching products to repair small cracks.

Avoid Salt and Deicers

Chemical deicers and salt can eat away your concrete surface and cause it to deteriorate. Using salt and deicers to melt ice during winters can cause the concrete surface to spall off. It can also get into cracks and joints, forcing a freeze-thaw cycle that could further damage your driveway by widening the cracks. To retain your driveway, it is preferable to use sand to maintain traction during winter.

Exercise Caution while Shoveling

You must implement caution while shoveling and plowing your driveway during winters. It is best to avoid sharp equipment, like shovels that have metal blades, which can scratch your concrete driveway. Even if you use a snow blower, make sure you raise the blades high enough to avoid scraping your driveway. In spite of exercising caution, there are chances you accidently damage your driveway. Hence, it is best to hire a snow removal service to ensure your driveway is clear of snow without any damage being caused to your driveway.

Implementing these tips can help you retain your driveway’s aesthetics and strength and enhance its longevity. While you can maintain your concrete driveway with these basic tasks, consulting a professional concrete paving company is preferable for the best results.

driveway-paving

5 Steps For Edmonton Driveway Paving

Asphalt driveways are prone to degradation over-time due to several reasons such as weather changes and traffic pressure. Being reliable, durable and low maintenance, asphalt pavement is a substantial investment so choosing the right Edmonton Driveway Paving contractor is essential. The process of driveway paving requires the right materials, heavy equipment as well as experience and skill. The whole process has a series of steps that leads to successful driveway paving. Therefore, you must make sure that these are a vital part of the contract.

  1. Removal of the Current Surface

Paving an asphalt structure on top of the damaged driveway causes the new pavement to crack easily. The contractor will first evaluate the driveway, and then dig out the unusable base. This may involve removing loose gravels, stumps, clay, and other soft material. This is an essential step, because if there is cracking in the asphalt, it will easily move upwards to the new pavement within a short period. To allow correction of sub base, removal of the current surface is vital.

  1. Grade the Subsoil

Grading is necessary to let the water run off your pavement in order to prevent a collapsed driveway. The contractor will grade the subsoil so that water runs down towards the road and also sideways away from your house. The contractor will then compact the base soil by running a drum roller over it. This helps in removing dirt to prevent any damage in future.

  1. Crushed Rock

The next step is to add crushed rock. The contractor will use coarse and sharp rocks that compact well to allow for proper drainage. The thickness of this layer varies depending on your subsoil. If your underlying soil is clay based, then you will need a huge amount of crushed rocks to get the solid base for a driveway. After this, the contractor compacts the crushed rock layer and usually gives it a week’s time to settle.

  1. Lay the Asphalt

The type, size and thickness of the asphalt needed will be specified, depending on the surface as well as the environment in the area. Usually, the best layer thickness is 2 to 3 inches. The hot mix asphalt is then layered on the driveway.

  1. Compacting and Finishing

After the asphalt is spread, the compacting process begins. It is advisable to do it on a sunny day as it makes the task easier and the asphalt cures better. The edge treatment commences after compacting. The edges should be hand tamped at 45-degree angle. It keeps the edges from eroding and strengthens your driveway. On completion of the whole process, your driveway gives you the rich, black look you want.

There are a number of ways contractors can cheat you with shortcuts on your driveway. It is essential you wisely choose the right service for your driveway paving. Check for their reputation, take referrals and ask questions. Choose the right Edmonton Driveway Paving service for your asphalt installation.

Image Source: commons.wikimedia.org